Rajesh Machine Tools Private Limited
Rajesh Machine Tools Private Limited
Mahadevwadi, Rajkot, Gujarat
SEND SMS
SEND EMAIL

Bending Machine

 

CNC Metal Bending Machine

CNC Metal Bending Machine
  • CNC Metal Bending Machine
Get Best Quote
Approx. Price: Rs 18 Lakh / PieceGet Latest Price

Product Details:

Length of Working3200 mm
Throat Dephts320 mm
Normal Pressure1600 kn
Ram Stroke200 mm
LayoutHorizontal, Vertical
Automatic GradeAutomatic

"RAJESH" Brand CNC Metal Bending Machine
DESIGN AND SALIENT FEATURES

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V - die.
STANDARD ACCESSORIES
  • CNC Controller - Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back guage as per customer requiremets
Request
Callback
Yes! I am Interested

NC Hydraulic Press Brake

NC Hydraulic Press Brake
  • NC Hydraulic Press Brake
Get Best Quote
Approx. Price: Rs 8 Lakh / NumberGet Latest Price

Product Details:

Power SourceHydraulic
Weight4200 kg
Dimension3770 x 2250 x 1400 mm
Control TypeCNC, Non-CNC
Max Sheet Width2 meter, >5 meter, 4 meter, 3 meter, 5 meter
Cutting Load120-150 ton

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machineries. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back gauge

  • Automatic lubrication system.

 

Request
Callback
Yes! I am Interested

Sheet Metal Press Brake

Sheet Metal Press Brake
  • Sheet Metal Press Brake
Get Best Quote
Approx. Price: Rs 7 Lakh / PieceGet Latest Price

Product Details:

Ram Stroke210 mm
Rated Power7.5 Kw
Length of Working3220 mm
Voltage320 V
Automatic GradeAutomatic
Max Sheet Width3 meter, 5 meter, 4 meter, 2 meter

"Accurate" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


Frame Construction: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


Ram & Bed: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


Lubrication System: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


Clutch And Brake: All "Accurate" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


Drive System: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


Ram Adjustment Mechanism: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

Press Break Machine

Press Break Machine
  • Press Break Machine
Get Best Quote
Approx. Price: Rs 6.5 Lakh / NumberGet Latest Price

Product Details:

Throat Dephts300 mm
Main Motor Power14 kW
Voltage220 - 380 V
Ram Stroke230 mm
Worktable Length2510 mm
Automatic GradeSemi-Automatic

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

Press Break Machine

Press Break Machine
  • Press Break Machine
Get Best Quote
Approx. Price: Rs 18 Lakh / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
Power SourceHYDraulic
Dimension3850 x 2356 x 1510 mm
Normal Pressure1650 kn
Voltage320 V
Max Sheet Width>5 meter, 3 meter, 2 meter, 4 meter, 5 meter
Worktable Length2550 mm

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

CNC Break Press

CNC Break Press
  • CNC Break Press
Get Best Quote
Approx. Price: Rs 25 Lakh / PieceGet Latest Price

Product Details:

Normal Pressure1600 kn
Throat Dephts340 mm
Ram Stroke215 mm
Main Motor Power11 kW
Length of Working3600 mm
PowerHydraulic

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke measurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back guage as per customer requiremets
Request
Callback
Yes! I am Interested

CNC Break Press Machine

CNC Break Press Machine
  • CNC Break Press Machine
Get Best Quote
Approx. Price: Rs 25 Lakh / PieceGet Latest Price

Product Details:

Bending Thickness5 mm
Worktable Length2500 mm
Bending Length2600 mm
Frequency50 Hz/60 Hz
Rated Power7.5 Kw
Weight4500 kg
Automatic GradeAutomatic
ConditionNew

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke measurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back gauge as per customer requirements
Request
Callback
Yes! I am Interested

CNC Press Brake

CNC Press Brake
  • CNC Press Brake
Get Best Quote
Approx. Price: Rs 18 Lakh / NumberGet Latest Price

Product Details:

Normal Pressure1700 kn
Throat Dephts520 mm
Ram Stroke260 mm
Main Motor Power16 kW
Length of Working3200 mm
Automatic GradeAutomatic
ConditionNew

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machineries. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelicm between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at conveenient place for easy reach of operator.

It includes push buttom pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back guage

  • Automatic lubrication system

 

Request
Callback
Yes! I am Interested

NC Hydraulic Press Brakes

NC Hydraulic Press Brakes
  • NC Hydraulic Press Brakes
Get Best Quote
Approx. Price: Rs 7.5 Lakh / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
Voltage320 V
Frequency50 Hz
Control TypeCNC
Max Sheet Width2 meter, 3 meter, 4 meter, 5 meter, >5 meter
Cutting Load>150 ton
Automatic GradeAutomatic

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machineries. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelicm between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at conveenient place for easy reach of operator.

It includes push buttom pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back guage system which is front operated are supplied as standared accessorits. Hydraulic components are of reputed are supplied as standared accessorits. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back guage

  • Automatic lubrication system.
Request
Callback
Yes! I am Interested

Hydraulic Press Break

Hydraulic Press Break
  • Hydraulic Press Break
Get Best Quote
Approx. Price: Rs 3.5 Lakh / NumberGet Latest Price

Product Details:

Power SourceHydraulic
Throat Dephts300 mm
Control TypeCNC, Non-CNC
Max Sheet Width2 meter, 5 meter, 4 meter, 3 meter
Cutting Load90-120 ton
Automatic GradeAutomatic

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back gauge

  • Automatic lubrication system.

 

Request
Callback
Yes! I am Interested

Brake Press

Brake Press
  • Brake Press
Get Best Quote
Approx. Price: Rs 6.6 Lakh / NumberGet Latest Price

Product Details:

Normal Pressure1700 kn
Throat Dephts315 mm
Ram Stroke220 mm
Main Motor Power14 kW
Voltage410 V

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

Standard Press Brake

Standard Press Brake
  • Standard Press Brake
Get Best Quote
Approx. Price: Rs 6.5 Lakh / NumberGet Latest Price

Product Details:

Depth Of Throat (Millimetres)400 mm
Main Motor Power27 kW
Ram Stroke225 mm
Normal Pressure1650 kn
Voltage210 - 300 V

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

Press Breaks

Press Breaks
  • Press Breaks
Get Best Quote
Approx. Price: Rs 6.5 Lakh / NumberGet Latest Price

Product Details:

Ram Stroke225 mm
Main Motor Power26 kW
Normal Pressure1650 kn
Throat Dephts300 mm
Weight4215 kg

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

Press Break Machines

Press Break Machines
  • Press Break Machines
Get Best Quote
Approx. Price: Rs 7 Lakh / NumberGet Latest Price

Product Details:

Power SourceElectric
Diemension2050 x 550 x 1410 mm
Motor Power5.5 kW
Dimension3200 x 2650 x 2650 mm
Voltage320 V

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.


FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.


RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.


LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.


CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.


DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.


RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Request
Callback
Yes! I am Interested

CNC Press Break

CNC Press Break
  • CNC Press Break
Get Best Quote
Approx. Price: Rs 18 Lakh / UnitGet Latest Price

Product Details:

Bending Thickness5 mm
Worktable Length2500 mm
Bending Length2500 mm
Rated Power11 kw
Voltage380 V

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ACCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back guage as per customer requiremets
Request
Callback
Yes! I am Interested

CNC Press Break Machine

CNC Press Break Machine
  • CNC Press Break Machine
Get Best Quote
Approx. Price: Rs 25 Lakh / PieceGet Latest Price

Product Details:

Main Motor Power14 kW
Bending Length2600 mm
Worktable Length2550 mm
Bending Thickness7 mm
Voltage220 - 380 V

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back guage as per customer requiremets
Request
Callback
Yes! I am Interested

CNC Brake Press

CNC Brake Press
  • CNC Brake Press
Get Best Quote
Approx. Price: Rs 22 Lakh / PieceGet Latest Price

Product Details:

Bending Length2600 mm
Worktable Length2550 mm
Bending Thickness9 nm
Ram Stroke245 mm
Normal Pressure1800 kn

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back guage as per customer requiremets
Request
Callback
Yes! I am Interested

CNC Brake Press Machine

CNC Brake Press Machine
  • CNC Brake Press Machine
Get Best Quote
Approx. Price: Rs 18 Lakh / UnitGet Latest Price

Product Details:

Main Motor Power14 kW
Ram Stroke215 mm
Throat Dephts305 mm
Normal Pressure1600 kn
Length of Working3200 mm

DESIGN AND SALIENT FEATURES:

  • Easy to operate and use of CNC system with large bending option and tooling library,

  • Synchronized bending reference is the key design of CNC press brake,

  • The body structure of CNC press brake is rigidly welded, stress less even under maximum load,

  • Best for complex bending and volume of production,

  • The accuracy level while bending is higher than conventional press brake machine,

  • Synchronized with Y1, Y2 axes, linear scales (for stroke measurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,

  • Control of AC servo back gauge through this CNC system,

  • CNC press brake painted with high chromed of longer life,

  • For emergency stop footswitch is also available,

  • Top tool of CNC press brake divided in to various gooseneck punches,

  • Bottom tool of CNC press brake designed with 4 V – die.
STANDARD ACCESSORIES:
  • CNC Controller – Delem Make
  • AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
  • Machine complete with all electrical & Hydraulic Safeties
  • Punch Adoptors and 2 Nos pedestals with flip-up fingers
  • 2 Nos. front support arms
  • Dia adaptor for 2 V Die
  • Foot pedal
  • Side & rear guard for safety compliance
OPTIONAL ASSCESSORIES:
  • Anti deflection system (Manual / Automatic)
  • Hydraulic Clamping
  • Tooling as per customer application requirements
  • Additional back gauge as per customer requirements
Request
Callback
Yes! I am Interested

NC Press Brake Machine

NC Press Brake Machine
  • NC Press Brake Machine
Get Best Quote
Approx. Price: Rs 6.6 Lakh / NumberGet Latest Price

Product Details:

Control TypeCNC
Max Sheet Width2 meter, 4 meter, 5 meter, 3 meter
Cutting Load120-150 ton
MaterialCast Iron
Voltage380 V

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back gauge

  • Automatic lubrication system
Request
Callback
Yes! I am Interested

Plate Rolling Machine

Plate Rolling Machine
  • Plate Rolling Machine
Get Best Quote
Approx. Price: Rs 2.5 Lakh / NumberGet Latest Price

Product Details:

Minimum Order Quantity1 Number
Weitht4100 kg
Power SourceElectric
Diameter of Side Roller85 mm
Diemension2050 x 550 x 1170 mm
Motor Power7.5 kW

TECHNICAL FEATURES: Bottom roll are fixed and driven by gears and warm reduction gear box. Top roll rotates in fixed positions and can be adjusted up & down manually by adjustable screws. Housing are made from M.S. Plate of suitable strength and mounted on heavy base frame. Rolls are made from forged steel and perfectly machined for accurate result. For longer life and smooth working of machine, gun metal bushes are provide and given sufficient lubrication system.


BENDING PROCESS: Place the plate between bottom and top rolls by adjusting top roll manually. Down the top roll and give pressure on the plate. Then start main motor in clock wise direction till one end of the plate comes over first bottom roll reserve the motors and get second end on second bottom. Continue above process until you ET desired as shown in picture.



MODEL TYPEWORKING LENGTH MMTOP ROLL MMBOTTOM ROLL MMPREBENDING CAPACITY MMMOTOR HP
RPB-11250 x 31009012
RPB-21250 x 612510533
RPB-31250 x 1015012565
RPB-41250 x 1217514087.5
RPB-51250 x 16190150107.5
RPB-61250 x 202001601210
RPB-71250 x 252402001615
RPB-81500 x 311510013
RPB-91500 x 614011535
RPB-101500 x 1016013567.5
RPB-111500 x 1218015087.5
RPB-121500 x 162001601010
RPB-131500 x 202151701212.5
RPB-141500 x 252502151620
RPB-152000 x 616013535
RPB-162000 x 1018515067.5
RPB-172000 x 12205160810
RPB-182000 x 162151751012.5
RPB-192000 x 202301901215
RPB-202000 x 252752301620
RPB-212500 x 617515037.5
RPB-222500 x 10200170610
RPB-232500 x 12230180815
RPB-242500 x 162402001020
RPB-252500 x 202602151220
RPB-262500 x 253002601630
RPB-273000 x 10240200615
RPB-283000 x 12260220820
RPB-293000 x 162752251020
RPB-303000 x 202902501225
RPB-313000 x 253402901640
Request
Callback
Yes! I am Interested

Hydraulic Press Break Machine

Hydraulic Press Break Machine
  • Hydraulic Press Break Machine
Get Best Quote
Approx. Price: Rs 6.6 Lakh / PieceGet Latest Price

Product Details:

Voltage220 - 380 V
Main Motor Power11 kW
Control TypeCNC
Max Sheet Width2 meter, 5 meter, 4 meter, 3 meter
Cutting Load90-120 ton

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.



TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

  • Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.

  • Foot switch fine stroke adjustment rod with limit switches

  • Manual lubrication, instruction manual.
  •  



OPTIONAL ACCESSORIES:

  • Goose NECK punch & other tooling (drawing required).

  • Electronic stroke counter

  • NC operated back gauge

  • Automatic lubrication system

 

Request
Callback
Yes! I am Interested

Sheet Metal Bending Machine

Sheet Metal Bending Machine
  • Sheet Metal Bending Machine
Get Best Quote
Approx. Price: Rs 4 Lakh / NumberGet Latest Price

Product Details:

Max Bending Radius100-150 mm
Bending Thickness11 mm.
Worktable Length2550 mm
Bending Length2500 mm
Voltage320 V

Request
Callback
Yes! I am Interested

Metal Bending Machine

Metal Bending Machine
  • Metal Bending Machine
Get Best Quote
Approx. Price: Rs 8 Lakh / NumberGet Latest Price

Product Details:

Max Bending Radius200-250 mm
Voltage380 V
Rated Power7.5 kW
Weight4200 kg
Length of Working3200 mm

Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Vinod Siddhapura (Director)
Survey No. 86, Plot No. 1/3/4, Village Veraval Tal. Kotda Sangani
Mahadevwadi, Rajkot- 360024, Gujarat, India



Call Us

Share Us

F GT L


Send E-mailSend SMS