Metal Sheet Cutting Machine

Product Details:

"RAJESH" BRAND Hydraulic Shearing Machine
ELECTICAL CONTROL PANEL: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components convenaiently.

RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion

CLEARANCE SETTING (BLADE GAP) ARRANGEMENT: The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.

STANDARD ACCESSORIES :

• Variable Rake Angle Adjustment With Selector Switch.


• Hydraulic Hold Downs Rapid Blade Clearance Adjustment.


• Front Operator Control Box.


• Movable Foot Switch.


• Four Edge Interchangeable Shear Blade.


• Operation And Mmaintenance Manual Book.

SALIENT FEATURES :

• Optimum Shearing Condition By Variable Rank Angle


• Rapid Blade Clearance Adjustment By Livers


• Hydraulic Hold Down To Aoid Slippage Of Sheets

Product Details:

We are renowned as one of the most reliable Under Crank Power Shearing Machine Manufacturers in India. The Under Crank Shearing Machine offered by us is well-suited for cutting to size general purpose unalloyed steel, Structural steel sheets up to 4 mm thickness. Each machine designed to the most accurate of efficiency offers outstanding operational performance dimensional accuracy telling on high output and dependability. The Mechanical under Crank Shearing Machine is available in sizes ranging from 1270 x 2 mm to 3125 x 4 mm.

Frame Construction
All RAJESH Brand Guillotine shears fabricated from is- 226 Grade. Rolled steel plates Table and cutting Beam are deeply reinforced and fines machined after stress relieving the interlocker design put the direct support to frame thus frame is strain free and eliminate welds at load supports thus the accuracy of the machine is never disturbed.

Bed
Super strong bed of closed box type construction stress relieved in a furnace rigid backbone for the lower knife Dovetail slots in front of the bed are provides for font gauge slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing Depressions in the top of the bed provide ample clearance for fingers in handing sheets narrower than the bed.

OPER Beam
Ram is also of solid steel plate carrying the upper knife its minimum weight ensure lesser load on the bearings the upper beam moves in fiat heat treated steel guide plates to avoid deflection for smooth running and maintain the accurate straightness of the upper knife.

Hold – Down Machanism
Solid clamping by powerful spring Loaded hold down is one of reasons for accuracy in over shears heavy uniform pressure is applied along the full length of the work piece preventing slippage regardless of variations in thickness hold down pressure is easily adjustable for clamping soft material Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

Rolling Key Clutch
Made of alloy steel for positive engagement and continuous operation having three key ways single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives
Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications heat treatment grinding and inspection is carefully controlled the blades are standardized and are easily replaced.

Accurate Gauging
The rigid and accurate construction of the back gauge provides with the machine allows consistency in the width of sheets being cut.

Lubrication
single shot lubricator provides oil to all lubrication's points where necessary thus all Bearing parts and Guide surface etc.

Drivel
Drive is through v- belts on flywheel and a reduction gear are made of steel hob cut for smooth running and Longer Life.

Product Details:

We are renowned as one of the most reliable Under Crank Power Shearing Machine Manufacturers in India. The Under Crank Shearing Machine offered by us is well-suited for cutting to size general purpose unalloyed steel, Structural steel sheets up to 4 mm thickness. Each machine designed to the most accurate of efficiency offers outstanding operational performance dimensional accuracy telling on high output and dependability. The Mechanical under Crank Shearing Machine is available in sizes ranging from 1270 x 2 mm to 3125 x 4 mm.

Frame Construction
All RAJESH Brand Guillotine shears fabricated from is- 226 Grade. Rolled steel plates Table and cutting Beam are deeply reinforced and fines machined after stress relieving the interlocker design put the direct support to frame thus frame is strain free and eliminate welds at load supports thus the accuracy of the machine is never disturbed.

Bed
Super strong bed of closed box type construction stress relieved in a furnace rigid backbone for the lower knife Dovetail slots in front of the bed are provides for font gauge slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing Depressions in the top of the bed provide ample clearance for fingers in handing sheets narrower than the bed.

OPER Beam
Ram is also of solid steel plate carrying the upper knife its minimum weight ensure lesser load on the bearings the upper beam moves in fiat heat treated steel guide plates to avoid deflection for smooth running and maintain the accurate straightness of the upper knife.

Hold – Down Machanism
Solid clamping by powerful spring Loaded hold down is one of reasons for accuracy in over shears heavy uniform pressure is applied along the full length of the work piece preventing slippage regardless of variations in thickness hold down pressure is easily adjustable for clamping soft material Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

Rolling Key Clutch
Made of alloy steel for positive engagement and continuous operation having three key ways single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives
Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications heat treatment grinding and inspection is carefully controlled the blades are standardized and are easily replaced.

Accurate Gauging
The rigid and accurate construction of the back gauge provides with the machine allows consistency in the width of sheets being cut.

Lubrication
single shot lubricator provides oil to all lubrication's points where necessary thus all Bearing parts and Guide surface etc.

Drivel
Drive is through v- belts on flywheel and a reduction gear are made of steel hob cut for smooth running and Longer Life.

Product Details:

"RAJESH" Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All "ACCURATE" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

“ACCURATE” Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All “ACCURATE” Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

“ACCURATE” Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All “ACCURATE” Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

"RAJESH" Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All "ACCURATE" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

"RAJESH" Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All "ACCURATE" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

ELECTICAL CONTROL PANEL: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components convenaiently.

RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion

CLEARANCE SETTING (BLADE GAP) ARRANGEMENT: The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.

STANDARD ACCESSORIES :

• Variable Rake Angle Adjustment With Selector Switch.


• Hydraulic Hold Downs Rapid Blade Clearance Adjustment.


• Front Operator Control Box.


• Movable Foot Switch.


• Four Edge Interchangeable Shear Blade.


• Operation And Maintenance Manual Book.

SALIENT FEATURES :

• Optimum Shearing Condition By Variable Rank Angle


• Rapid Blade Clearance Adjustment By Livers


• Hydraulic Hold Down To Aoid Slippage Of Sheets

Product Details:

“RAJESH” Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness TO 25MM thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.

FRAME CONSTRUCTION: All “ACCURATE” Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.

BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.

ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.

DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.

Product Details:

"RAJESH"Brand Hydraulic Shearing Machine
ELECTICAL CONTROL PANELThe electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components convenaiently.

RAKE ANGLE (CUTTING ANGLE) ADJUSTMENTCutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion

CLEARANCE SETTING (BLADE GAP) ARRANGEMENTThe shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.

STANDARD ACCESSORIES

• Variable Rake Angle Adjustment With Selector Switch.


• Hydraulic Hold Downs Rapid Blade Clearance Adjustment.


• Front Operator Control Box.


• Movable Foot Switch.


• Four Edge Interchangeable Shear Blade.


• Operation And Mmaintenance Manual Book.

SALIENT FEATURES

• Optimum Shearing Condition By Variable Rank Angle


• Rapid Blade Clearance Adjustment By Livers


• Hydraulic Hold Down To Aoid Slippage Of Sheets

Product Details:

We are Manufactures and Suppliers of Mild Steel Plate Cutting Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers. 

Product Details:

“Accurate” Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.
Frame Construction: All “Accurate” Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.
BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.

Upper Beam: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.
Hold-down Mechanism: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.
Rolling Key Clutch: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Shear Knives: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.

Accurate Gauging: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

Lubrication: Single shot lubrication provides oil to all lubrication points, where necessary.

Drive: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.