Product Details:
Voltage (Volt) | 380 |
Cutting Material | Iron, Stainless Steel |
Operation Mode | Automatic, Semi-Automatic |
Max Shear Thickness(mm) | 5 to 6 mm |
Max Shear Width | 3000-4000 mm |
Strokes per min | 12.0 |
Weight (Kilogram) | 8800 |
“ACCURATE” Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.
FRAME CONSTRUCTION: All “ACCURATE” Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.
BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.
UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.
HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.
ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.
ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.
LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.
DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life.
Product Details:
Operation Mode | Automatic |
Material to be Sheared | Stainless Steel, Iron, Carbon Steel |
Cutting Material | Copper |
Max Shear Thickness | 3-4 mm, 1-2 mm, 2-3 mm, 4-5 mm, 5-6 mm |
Max Shear Width | 1000-2000 mm, 3000-4000 mm, 2000-3000 mm |
Shearing Material | Stainless Steel |
Shearing Width | 6500 mm |
Automatic Grade | Automatic |
Max Shear Thickness(mm) | 5 to 6, 4 to 5, 2 to 3, 3 to 4 |
Power | 8 kW |
Voltage | 380 V |
Frequency | 50 Hz/60 Hz |
Weight | 8400 kg |
ELECTRICAL CONTROL PANEL The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components conveniently.
RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion
CLEARANCE SETTING (BLADE GAP) ARRANGEMENT The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.
STANDARD ACCESSORIES
SALIENT FEATURES
Product Details:
Suitable For Welding Rod | <1mm |
Operation Mode | Semi-Automatic, Automatic |
Cutting Material | Iron, Stainless Steel |
Max Shear Thickness | 3-4 mm, 5-6 mm, 4-5 mm, >6 mm, 1-2 mm, 2-3 mm |
Max Shear Width | 2000-3000 mm, 3000-4000 mm, 1000-2000 mm |
Condition | New |
Frequency (Hertz) | 50 Hz |
Max Shear Thickness(mm) | 1 to 2, 5 to 6, 4 to 5, 2 to 3, 3 to 4 |
Voltage | 380 V |
Rated Power | 35 kW |
Dimension | 7000 x 2700 x 3150 mm |
Cutting Width | 6000 mm |
"RAJESH GROUP" Brand Under Crank Shearing Machine is suited for cutting to size general purpose unalloyed steel. Structural steel sheets up to 4 mm thickness, with high productivity. Each machine, designed to the most accurate of efficiency, offers outstanding operational performance dimensional accuracy telling on high output and dependability.
FRAME CONSTRUCTION: All "ACCURATE" Brand guillotine shears fabricated from Is-226 grade. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load supports. Thus the accuracy of machine is never disturbed.
BED: Super strong bed of closed box type construction. Stress relived in a furnace. Forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed are also provided for machined pad across the bed for convenient setting of front gauge brackets at any desired spacing, Depressions in the top of the bed provide ample clearance for fingers in handling sheets narrower then the bed.
UPPER BEAM: Ram is also of solid steel plate, carrying the upper knife. Their minimum weights ensure lesser load on the bearings. The upper beam moves in flat heat treated steel guide plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.
HOLD-DOWN MECHANISM: Solid clamping by powerful spring loaded hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of variations in thickness. Hold down pressure is easily adjustable for clamping soft material. Different thickness of material can be cut without further adjustment with consistently accurate and burr free results.
ROLLING KEY CLUTCH: Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.
SHEAR KNIVES: Knives are manufactured strictly as per standard material of HCHCR/OHNS. Every step from designing metallurgical specifications, heat treatment , grinding and inspection is carefully controlled. The blades are standardized and are easily replaced.
ACCURATE GAUGING: The rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.
LUBRICATION: Single shot lubrication provides oil to all lubrication points, where necessary.
DRIVE: Drive is through V-belts on flywheel and a reduction gears are made of steel, hob cut for smooth running and longer life
Product Details:
Operation Mode | Semi-Automatic, Automatic |
Cutting Material | Copper, Carbon Steel, Iron, Aluminum, Stainless Steel |
Max Shear Width | 3000-4000 mm, 2000-3000 mm, 1000-2000 mm |
Automation Grade | Automatic |
Shearing Material | Stainless Steel |
Shearing Thickness | 4 mm |
Shearing Width | 4500 mm |
Condition | New |
Max Shear Thickness(mm) | 3 to 4, 5 to 6, 2 to 3, 4 to 5 |
Power Source | Hydraulic |
Voltage | 380 V |
Dimension | 6500 x 2650 x 3350 mm |
Our customers can avail from us a variety of Hydraulic Shearing Machine. These heavy duty hydraulic shearing machines are used in a variety of industries and assures cost effective operation and optimum productivity. Also, these have a sturdy and compact structure with easy to operate levers. Owing to these unmatched qualities, our machines are demanded in bulk all over the international market.
Product Details:
Operation Mode | Semi-Automatic, Automatic |
Suitable For Welding Rod | <1mm |
Material to be Sheared | Iron, Copper, Stainless Steel |
Max Shear Width | 2000-3000 mm, 1000-2000 mm, 3000-4000 mm, >4000 |
Max Shear Thickness | 4-5 mm, 2-3 mm, 5-6 mm, >6 mm, 3-4 mm, 1-2 mm |
Shearing Material | Stainless Steel |
Shearing Width | 5000 mm |
Automatic Grade | Automatic |
Power Source | Hydraulic |
Power | 7.5 kW |
Voltage | 370 V |
"RAJESH" Brand Hydraulic Shearing Machine
ELECTICAL CONTROL PANEL: The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components convenaiently.
RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT: Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion
CLEARANCE SETTING (BLADE GAP) ARRANGEMENT: The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.
STANDARD ACCESSORIES :
SALIENT FEATURES :
Product Details:
Max Shear Thickness | 4-5 mm, 2-3 mm, 5-6 mm, 3-4 mm |
Cutting Material | Carbon Steel, Iron, Aluminum, Stainless Steel |
Max Shear Width | 3000-4000 mm, 1000-2000 mm, 2000-3000 mm |
Shearing Material | Stainless Steel |
Shearing Width | 5100 mm |
Automatic Grade | Automatic |
Max Shear Thickness(mm) | 5 to 6, 4 to 5, 3 to 4, 1 to 2, 2 to 3 |
Power Source | Hydraulic |
Voltage | 320 V |
Rated Power | 12.5 kW |
"RAJESH" Brand Hydraulic Shearing Machine
ELECTICAL CONTROL PANEL The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components convenaiently.
RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion
CLEARANCE SETTING (BLADE GAP) ARRANGEMENT The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.
STANDARD ACCESSORIES
SALIENT FEATURES