Bending Machines

Product Details:

"RAJESH" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

DESIGN AND SALIENT FEATURES:

• Easy to operate and use of CNC system with large bending option and tooling library,


• Synchronized bending reference is the key design of CNC press brake,


• The body structure of CNC press brake is rigidly welded, stress less even under maximum load,


• Best for complex bending and volume of production,


• The accuracy level while bending is higher than conventional press brake machine,


• Synchronized with Y1, Y2 axes, linear scales (for stroke measurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,


• Control of AC servo back gauge through this CNC system,


• CNC press brake painted with high chromed of longer life,


• For emergency stop foot switch is also available,


• Top tool of CNC press brake divided in to various goose neck punches,


• Bottom tool of CNC press brake designed with 4 V – die.

STANDARD ACCESSORIES:

• CNC Controller – Delem Make
• AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
• Machine complete with all electrical & Hydraulic Safeties
• Punch Adoptors and 2 Nos pedestals with flip-up fingers
• 2 Nos. front support arms
• Dia adaptor for 2 V Die
• Foot pedal
• Side & rear guard for safety compliance

OPTIONAL ACCESSORIES:

• Anti deflection system (Manual / Automatic)
• Hydraulic Clamping
• Tooling as per customer application requirements
• Additional back guage as per customer requirements

Product Details:

ELECTRICAL CONTROL PANEL The electrical control panel is located on the left hand side of the machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if needed to be replaced. It is wired cleanly and labelled/ferruled properly as per the International practices to help easily locate any fault and replace components conveniently.

RAKE ANGLE (CUTTING ANGLE) ADJUSTMENT Cutting angle of the blade is electro hydraulically adjusted with push buttons with indicator lights on the operator console. The cutting angle adjustment helps to achieve, cutting variety of material and thicknesses without twist and distortion

CLEARANCE SETTING (BLADE GAP) ARRANGEMENT The shears are equipped with levers calibrated in thickness on both sides of the machine to adjust the clearance between top and bottom blade according the sheet/plate thickness. The setting can be done swiftly and quickly without use of filler gauges involving without use of filler gauges involving cumbersome procedure and difficulty. The use of correct blade gap ensures burr free cutting results and improves blade life considerably.

STANDARD ACCESSORIES

• Variable Rake Angle Adjustment With Selector Switch.


• Hydraulic Hold Downs Rapid Blade Clearance Adjustment.


• Front Operator Control Box.


• Movable Foot Switch.


• Four Edge Interchangeable Shear Blade.


• Operation And Maintenance Manual Book.

SALIENT FEATURES

• Optimum Shearing Condition By Variable Rank Angle


• Rapid Blade Clearance Adjustment By Livers


• Hydraulic Hold Down To Avoid Slippage Of Sheets

Product Details:

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

"Accurate" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

TECHNICAL SPECIFICATIONHydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. "RAJESH"Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard "V" Block & "V" Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

TOOLINGSOne set of die-block with multi "V" grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.


• Foot switch fine stroke adjustment rod with limit switches


• Manual lubrication, instruction manual.

OPTIONAL ACCESSORIES

• Goose NECK punch & other tooling (drawing required).


• Electronic stroke counter


• NC operated back gauge


• Automatic lubrication system.

Product Details:

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

"Accurate" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

Frame Construction: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

Lubrication System: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

Clutch And Brake: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

Ram Adjustment Mechanism: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

"ACCURATE" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

DESIGN AND SALIENT FEATURES:

• Easy to operate and use of CNC system with large bending option and tooling library,


• Synchronized bending reference is the key design of CNC press brake,


• The body structure of CNC press brake is rigidly welded, stress less even under maximum load,


• Best for complex bending and volume of production,


• The accuracy level while bending is higher than conventional press brake machine,


• Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,


• Control of AC servo back gauge through this CNC system,


• CNC press brake painted with high chromed of longer life,


• For emergency stop foot switch is also available,


• Top tool of CNC press brake divided in to various goose neck punches,


• Bottom tool of CNC press brake designed with 4 V - die.

STANDARD ACCESSORIES:

• CNC Controller - Delem Make
• AC Servo Back gauge with dual ball screw drive (Range 0-600 mm)
• Machine complete with all electrical & Hydraulic Safeties
• Punch Adoptors and 2 Nos pedestals with flip-up fingers
• 2 Nos. front support arms
• Dia adaptor for 2 V Die
• Foot pedal
• Side & rear guard for safety compliance

OPTIONAL ACCESSORIES:

• Anti deflection system (Manual / Automatic)
• Hydraulic Clamping
• Tooling as per customer application requirements
• Additional back guage as per customer requirements

Product Details:

TECHNICAL SPECIFICATION Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard "V" Block & "V" Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

TOOLINGS One set of die-block with multi "V" grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.


• Foot switch fine stroke adjustment rod with limit switches


• Manual lubrication, instruction manual.

OPTIONAL ACCESSORIES

• Goose NECK punch & other tooling (drawing required).


• Electronic stroke counter


• NC operated back gauge


• Automatic lubrication system.

Product Details:

Technical Specification:

• Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machineries. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelicm between ram & table, by providing mechanical links connected with cylinder. The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at conveenient place for easy reach of operator. It includes push buttom pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back guage system which is front operated are supplied as standared accessorits. Hydraulic components are of reputed are supplied as standared accessorits. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

Toolings:

• One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

Standard Accessories:

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.
• Foot switch fine stroke adjustment rod with limit switches
• Manual lubrication, instruction manual.

OPTIONAL ACCESSORIES:

• Goose NECK punch & other tooling (drawing required).
• Electronic stroke counter
• NC operated back guage
• Automatic lubrication system.

Product Details:

TECHNICAL SPECIFICATION Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard "V" Block & "V" Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

TOOLINGS One set of die-block with multi "V" grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.


• Foot switch fine stroke adjustment rod with limit switches


• Manual lubrication, instruction manual.

OPTIONAL ACCESSORIES

• Goose NECK punch & other tooling (drawing required).


• Electronic stroke counter


• NC operated back gauge


• Automatic lubrication system.

Product Details:

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.


• Foot switch fine stroke adjustment rod with limit switches


• Manual lubrication, instruction manual.

 

OPTIONAL ACCESSORIES:

• Goose NECK punch & other tooling (drawing required).


• Electronic stroke counter


• NC operated back guage


• Automatic lubrication system.

Product Details:

TECHNICAL SPECIFICATION: Hydraulic Press Brakes are designed and developed through years of experience in Sheet Metal Working Machinery. Rajesh Hydraulic Press Brakes are developed by keeping latest technology in mind. Booth cylinders are mounted at back side of Press brake and are synchronizes for parallelism between ram & table, by providing mechanical links connected with cylinder.

The Heavy duty steel construction frame is so designed to absorb heavy shocks of overload all welding edges are properly machined for weld joint. The electric control panel is fixed on side wall at convenient place for easy reach of operator.

It includes push button pendant and foot switch. Standard “V” Block & “V” Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed are supplied as standard accessories. Hydraulic components are of reputed make like Vedekers, Rexroth, Dowty, Yiken, Polyhydron etc.

TOOLINGS: One set of die-block with multi “V” grooves and universal upper blade is supplied with the machine. Multiple clamps provided to assist champing of segmented top tool. Toolings as per job application can be suggested as supplied (Optional).

STANDARD ACCESSORIES:

• Electric motor, control panel with selection of INCH-ONCE-AUTO mode of operation.


• Foot switch fine stroke adjustment rod with limit switches


• Manual lubrication, instruction manual.

 

OPTIONAL ACCESSORIES:

• Goose NECK punch & other tooling (drawing required).


• Electronic stroke counter


• NC operated back gauge


• Automatic lubrication system.

Product Details:

"RAJESH" Brand Press Brake Machine are designed taking into consideration all severe service conditions of sheet metal shop. The machine are heavy duty robust in design and acclaimed recognition in requiring high accuracy productivity & efficiency.

FRAME CONSTRUCTION: Frame in made of steel fabricated construction of interlocked robust design. Machines are constructed with safeguards against undesired deflections and breakage. The frame distributes the stresses , supporting the bed directly on the frame. The double support shoe of frame gap provides extremely high rigidly, alignment, accuracy and keeps frame structure at right angles to the bed.

RAM & BED: Ram & bed are straight and parallel of both the working surface under the rated load. The bed is accurately machined and upper surface is grinded to keep the die in correct alignment. The ram is guided and supported throughout the stroke by accurately machined guide ways.

LUBRICATION SYSTEM: The lubrication system on a machine is an assurance for its trouble free running. The bearing parts are linked with high density polythene pipe- line spread at every point where lubrication is required.

CLUTCH AND BRAKE: All "ACCURATE" Brands press brake are provided with high-torque low-inertia friction clutch, synchronized with heavy duty. The powerful disc type clutch is easily accessible, simple to adjust and picks the load from standing start and it frequent start & stop. The brake is interlocked with clutch to stop the ram immediately at any point of motion when the clutch is released. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal.

DRIVE SYSTEM: Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsion stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon steel.

RAM ADJUSTMENT MECHANISM: Motorized ram adjustment making is very easy to adjust the shut height to a desired value. The clutch offered easy operation in disconnecting either of right or left screws in order to set the ram in correct position. This mechanism facilities quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch.

Product Details:

DESIGN AND SALIENT FEATURES:

• Easy to operate and use of CNC system with large bending option and tooling library,


• Synchronized bending reference is the key design of CNC press brake,


• The body structure of CNC press brake is rigidly welded, stress less even under maximum load,


• Best for complex bending and volume of production,


• The accuracy level while bending is higher than conventional press brake machine,


• Synchronized with Y1, Y2 axes, linear scales (for stroke meausurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,


• Control of AC servo back gauge through this CNC system,


• CNC press brake painted with high chromed of longer life,


• For emergency stop footswitch is also available,


• Top tool of CNC press brake divided in to various gooseneck punches,


• Bottom tool of CNC press brake designed with 4 V – die.

STANDARD ACCESSORIES:

• CNC Controller – Delem Make
• AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
• Machine complete with all electrical & Hydraulic Safeties
• Punch Adoptors and 2 Nos pedestals with flip-up fingers
• 2 Nos. front support arms
• Dia adaptor for 2 V Die
• Foot pedal
• Side & rear guard for safety compliance

OPTIONAL ACCESSORIES:

• Anti deflection system (Manual / Automatic)
• Hydraulic Clamping
• Tooling as per customer application requirements
• Additional back guage as per customer requiremets

Product Details:

hydraulic press brake machine require customer application metal sheet, ss sheet, copper, alluminium, all kind of sheet bending machine job will be done

Product Details:

Design And Salient Features:

• Easy to operate and use of CNC system with large bending option and tooling library,
• Synchronized bending reference is the key design of CNC press brake,
• The body structure of CNC press brake is rigidly welded, stress less even under maximum load,
• Best for complex bending and volume of production,
• The accuracy level while bending is higher than conventional press brake machine,
• Synchronized with Y1, Y2 axes, linear scales (for stroke allurement up to 0.01mm), PLC (Programmable Logic Control), servo drive, power pack, high pressure internal gear pump, imported cable with connector etc.,
• Control of AC servo back gauge through this CNC system,
• CNC press brake painted with high chromed of longer life,
• For emergency stop footswitch is also available,
• Top tool of CNC press brake divided in to various gooseneck punches,
• Bottom tool of CNC press brake designed with 4 V – die.

Standard Accessories:

• CNC Controller – Delem Make
• AC Servo Backgauge with dual ball screw drive (Range 0-600 mm)
• Machine complete with all electrical & Hydraulic Safeties
• Punch Adoptors and 2 Nos pedestals with flip-up fingers
• 2 Nos. front support arms
• Dia adaptor for 2 V Die
• Foot pedal
• Side & rear guard for safety compliance

Optional Accessories:

• Anti deflection system (Manual / Automatic)
• Hydraulic Clamping
• Tooling as per customer application requirements
• Additional back gauge as per customer requirements

Product Details:

Our customers can avail from us a variety of Hydraulic Shearing Machine. These heavy duty hydraulic shearing machines are used in a variety of industries and assures cost effective operation and optimum productivity. Also, these have a sturdy and compact structure with easy to operate levers. Owing to these unmatched qualities, our machines are demanded in bulk all over the international market.

Product Details:

We are Manufactures and Suppliers of Sheet Metal Bending Machine from Rajkot, Gujarat. Our Motto is to provide best quality material to our esteem customers.